System Interface; Documents - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

System Interface

Documents For correct use of Ekip Com communication modules, two documents are available in the ABB library:
155 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Document
1SDH001140R0001
1SDH001140R0001_CSI_Emax2
The documents are available in a single .zip file (1SDH001140r0001).
The .zip file contains the files for integrating Emax 2 in the available communication networks. The specific
Ekip Com module contains an IMPORTANT file with notes on how to use the files.
File
ABBS0E7F.gsd
Ekip COM EtherNetIPTM_v02.eds
Ekip_COM_DeviceNetTM_v02.eds
emax2_v02_00_2003.icd
emax2_v02_00_2003_Citect.icd
GSDML-V2.3-ABB S.p.A.-SACE
Emax 2-20130924.xml
NOTE: consult the ABB library for the most recent version of the .zip file.
Description
Guidelines with details for putting communication modules into
service.
Table with the references of all the registers for the parameters,
commands, measurements, etc.
Protocol / Ekip Com module
.gsd file for the configuration of the Ekip Com Profibus DP module
.eds file for the configuration of the Ekip Com EtherNet/IP™ module
.eds file for the configuration of the Ekip Com DeviceNet™ module
.icd file for the configuration of the Ekip Com IEC 61850 module
.icd file for the configuration of the Ekip Com IEC 61850 module
.xml for the configuration of the Ekip Com Profinet module
ABB | SACE Emax 2
System Interface | 8 - External toroid protections