Documents And Tools For The Design Engineer; Foreword; Software List; E-Design - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

Documents and Tools for the design engineer

1 - Foreword

2 - Software list

e-Design ABB software suite that includes the following tools: DOC, CAT, Curves, DOCSolar, OTC and UniSec (for the
DOCSolar Software that allows a design to be produced for photovoltaic systems connected to the network, assisting
10 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Various software programs and documents are available that allow optimization of the performance and
installation of Emax 2. Most of them are available free on the internet.
The following software programs are available for Emax 2.
configuration of medium voltage switchgear).
Further information is available on the website abb.com
software ( ).
-D
e eSiGn
DOC ABB SACE software for designing and calculating single-line diagrams for low and medium voltage electrical
installations, for choosing protection and operating devices, and for checking and coordinating the protections.
DOC is available with the e-Design software suite.
CAT ABB SACE software for preparing technical/commercial estimates for ABB SACE products, and to facilitate
the creation of quotations and offers.
CAT is available with the e-Design software suite.
Curves Software for designing, calibrating and to printing the trip curves of the protection devices.
Curves is available with the e-Design software suite.
the designer at every stages of the project.
DOCSolar is available with the e-Design software suite.
OTC Thermal calculation software that allows you to check the thermal behavior of switchgear and to size fans and
air conditioners to be installed in the switchgear
OTC is available with the e-Design software suite.
(O ) which is the direct link to download the
verview
Documents and Tools for the design engineer | 2 - Software list
ABB | SACE Emax 2