YR: Remote resetting coil
251 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Continued from the previous page
The tables listing the available voltages and the electrical characteristics are provided below:
Available voltages (Un)
24 V AC/DC
30 V AC/DC
48 V AC/DC
60 V AC/DC
110...120 V AC/DC
220...240 V AC/DC
240...250 V AC/DC
277 V AC/DC
380...400 V AC
415...440 V AC
480...500 V AC
YU: Connections
Further information is available on page 174, or on the website http://www.abb.com/abblibrary/
DownloadCenter/, where the wiring diagram is available 1SDm000091r0001.
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0504.
The remote resetting coil deactivates the lock at the closing of the circuit-breaker, generated by the opening
of the circuit-breaker caused by tripping of the Ekip protection trip unit.
YR for E1.2
YR for E2.2 - E4.2 - E6.2
The tables listing the available voltages and the electrical characteristics are provided below:
Available voltages (Un)
24 V AC/DC
110 V AC/DC
220 V AC/DC
YR: Connections
Further information is available on page 174, or on the website http://www.abb.com/abblibrary/
DownloadCenter/, where the wiring diagram is available 1SDm000091r0001.
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0606.
General characteristics
Inrush power (Ps)
Continuous power (Pc)
Opening time
1SDH000999r0504
R1
R2
YR
R1
R2
YR
General characteristics
Operating limits
1SDH000999r0606
ABB | SACE Emax 2
YU
300 VA/W
3.5 VA/W
50 ms
and for E2.2-E4.2-E6.2 in the kit sheet
90...110 %Un
and for E2.2-E4.2-E6.2 in the kit sheet
Electrical accessories | 1 - Electrical control accessories