Signallings - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

Signallings

199 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
The following table shows the possible signals, and their meaning:
NOTE: for the references of contacts and inputs, see the paragraph "Connections", on page
194.
A
Pos. Name Description
Power LED, green. The possible states are:
B A - • Off: power supply absent.
C
• On fixed: power supply present.
D
LED for signalling the state of contact the K3 - K7, green. The possible states are:
E
B O 01 • Off: contact open.
F
• On fixed: contact closed.
G
LED for signalling the state of contact the K4 - K8, green. The possible states are:
H
C O 02 • Off: contact open.
I
• On fixed: contact closed.
LED for signalling the state of the contact K5 - K9, green. The possible states are:
D O 03 • Off: contact open.
• On fixed: contact closed.
LED for signalling the state of the contact K6 - K10, green. The possible states are:
E O 04 • Off: contact open.
• On fixed: contact closed.
LED for signalling the physical state of the input H1, green
F I 01 • Off: floating input.
• On fixed: input short-circuited on HC.
LED for signalling the physical state of the input H2, green
H I 02 • Off: floating input.
• On fixed: input short-circuited on HC.
LED for signalling the physical state of the input H3, green
G I 03 • Off: floating input.
• On fixed: input short-circuited on HC.
LED for signalling the physical state of the input H4, green
I I 04 • Off: floating input.
• On fixed: input short-circuited on HC.
(1)
The LED turns on and off according to the physical state of the input, without taking any account of how the
Delay parameter is set.
ABB | SACE Emax 2
. The possible states are:
(1)
. The possible states are:
(1)
. The possible states are:
(1)
. The possible states are:
(1)
Electronic accessories | 5 - Ekip Signalling 4K module