Htc / Ltc; Terminal-Cover; Pb : Phase Separators - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

HTC / LTC

: Terminal-cover Terminal-covers are applied in order to reduce the risk of direct contact with live parts. They are available in
(1)
PB : Phase separators The phase separators are applied in order to increase the insulation clearance between two adjacent phases.
(1)
261 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
two types:
• HTC - High terminal-covers
• LTC - Low terminal-covers
(1)
Only for E1.2
Information on assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the kit sheets:
• for the high terminal-covers
1SDH000999r0612
• 1SDH000999r0613 for the low terminal-covers
(1)
Only for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the kit sheet 1SDH000999r0608.
Mechanical accessories | 1 - Mechanical Protection accessories
ABB | SACE Emax 2