Components Of The Menus; Protections Menu - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

Sace emax 2 series low voltage air circuit-breakers
Hide thumbs Also See for SACE Emax E1.2:
Table of Contents

Advertisement

Components of the menus The menus appear as follows:
Protections Menu The following table shows the submenus and the protections associated to the menu Protections, and the
47 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
A
S(V) Protection
Current-Voltage Protection (51V)
S(V) Protection
Current-Voltage Protection (51V)
Protection MCR
Short circuit
D Protection
Directional (67)
IU Protection
Current unbalance (46)
Figure 12
The following table provides a description of the various areas of the menus:
Pos.
Function
A
It opens the higher level menu, or if there is no higher level, the Menu page.
B
It displays the name of the menu.
• It displays a list of the available submenus, the parameters that can be set, and the
commands that can be performed
C
• Depending on the selection, it opens a submenu, the Modify Parameters page, or an
information page, or performs a command.
D
Scroll the list
NOTE: in the menus, the description and the ANSI code are indicated under each protection,
and the current value is shown under each parameter.
relevant Ekip Touch trip units.
IMPORTANT:
• Selecting a protection opens the list of the parameters that can be set for the
selected protection.
• With Hi-Touch and G Hi-Touch trip units, and the Dual Set function enabled (see
the Settings menu), the protections can be set according to two configurations (Set
A and Set B), of which the default configuration can be selected.
Protections
L Protection
S Protection
S2 Protection
• Set A
(1)
I Protection
• Set B
(1)
2I Protection
G Protection
Gext Protection
(1)
Submenus available with Hi-Touch and G Hi-Touch trip units, and the Dual Set function enabled (see the
Settings menu).
(2)
With Touch and G Touch trip units, alternative protection to Gext, therefore available only without S.G.R.
toroid (see the menu Settings, Circuit Breaker, Ground protection).
(3)
Protection available with S.G.R. toroid (see the menu Settings, Circuit Breaker, Ground protection), and
alternative to RC protection (see the Advanced menu).
B
Advanced
Trip units
Touch
-
Hi-Touch
Touch
Touch
(2)
Touch
(3)
ABB | SACE Emax 2
C
D
D
G-Touch
-
G Hi-Touch
G-Touch
G-Touch
(2)
G-Touch
Ekip Touch protection trip unit | 6 - Menu

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sace emax e2.2Sace emax e4.2Sace emax e6.2

Table of Contents