Anti-Insertion Lock; Moc: Operation Counter; Plp: Padlock In Connected/Test/Disconnected Positions - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

Anti-insertion lock The anti-insertion lock allows the moving part of the circuit-breaker to be inserted only into the corresponding
MOC: Operation counter The mechanical operation counter displays the number of mechanical operations performed by the circuit-
PLP: padlock in connected/
test/disconnected positions
263 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
fixed part.
It is intended for all withdrawable circuit breakers.
L
.2 12
E1 10
08
C- N 16 06
.2 B- 12
E1 10
08
02 06
Lock for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0701.
breaker.
MOC for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0710.
The PLP locks the moving part of a withdrawable circuit-breaker in the fixed part, in one of the following
positions:
• connected
• test
• disconnected
Only one type is available that allows you to mount up to three padlocks with a diameter of 8 mm.
NOTE: the PLP lock can also be supplied in the presence of a KLP lock
PLP for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0707.
L
.2
E 1 1 2
1 0
0 8
0 6
-N
B -C 1 6
1 2
E 1 .2 1 0
0 8
0 6
0 2
Lock for E2.2 - E4.2 - E6.2
1SDH000999r0701
00001
MOC for E2.2 - E4.2 - E6.2
1SDH000999r0710
PLP for E2.2 - E4.2 - E6.2
1SDH000999r0707
and for E2.2-E4.2-E6.2 in the kit sheet
00001
and for E2.2-E4.2-E6.2 in the kit sheet
and for E2.2-E4.2-E6.2 in the kit sheet
Mechanical accessories | 2 - Mechanical safety accessories
ABB | SACE Emax 2
02 08 E2. 2
10 N-B -S
12
16 20
25
08 10 E2. 2
12 H
16
MAT 20 25
CH
ALS O
THE
RIG
HT SID
E