ABB SACE Emax E1.2 Operating Instructions For The Design Engineer page 211

205 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Continued from the previous page
The following tables illustrate the paths from the display to access the pages for programming the actions you
wish the trip unit to perform in the event of an input being activated.
NOTE: the selection of an action opens a list of the programming parameters, that is, a list
of the events for which the action can be performed, and the related delay. For details on the
parameters, see the chapter "20 - Operating features", and the paragraph "Functional
characteristics" on page 124.
...
Advanced
Current thresholds
Functions
(1)
Menus available with the Double Set function disabled (see the chapter "6 - Menu", and the paragraph "
Settings Menu" on page 49.
Set A
Set B
Advanced
Functions
(1)
Menus available with the Double Set function enabled (see the chapter "6 - Menu", and the paragraph "
Settings Menu" on page 49.
...
Frequency
Measurements
Energy
Peak factor
...
(1)
Menu available with Ekip Measuring or Ekip Measuring Pro modules.
Circuit-breaker
Main frequency
Modules
Settings
Power Controller
...
System
Functions
Maintenance
External Trip
(1)
Trip RESET
External Trip
Trip RESET
(1)
Turn on SET B
Energy counters
(1)
Reset counters
RESET Energy
...
Ground protection
Installation
...
Functions
YO Command
YC Command
ABB | SACE Emax 2
Switch On LOCAL
Signalling RESET
Continued on the next page
Electronic accessories | 6 - Ekip Signalling 2K modules