Sl: Shutter Lock; Sle : External Shutter Lock; Dlc: Door Opening Lock With The Circuit-Breaker In Closed Position - ABB SACE Emax E1.2 Operating Instructions For The Design Engineer

SL: shutter lock The SL shutter locks the shutters of the fixed part.
SLE : external shutter lock The SLE locks the shutters from the outside of the fixed part with the aid of a 4 mm, 6 mm or 8 mm padlock.
(1)
DLC: Door opening lock with
the circuit-breaker in closed
position
265 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
It is possible to lock the upper and lower shutters independently.
This is an accessory available on all the fixed parts and can work with the aid of padlocks with diameters of 4
mm - 0.16", 6 mm - 0.24", 8 mm - 0.32", with a maximum of four padlocks per fixed part (two for the upper
shutters and two for the lower shutters).
NOTE: The padlocks are at customer's expenses.
SL for E1.2
NOTE: The padlocks are at customer's expenses.
(1)
Not available for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the kit sheet 1SDH001000r0724.
The DLC prevents the following operations from being carried out:
• opening the switchgear door with the circuit-breaker closed if the circuit-breaker is in fixed version
• opening the switchgear door with the circuit-breaker closed and in connected position if the circuit-breaker
is in fixed version
• closing of the circuit-breaker when the switchgear door is open
Information on the assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular for E1.2 in the kit sheet
1SDH001000r0712.
SL for E2.2 - E4.2 - E6.2
1SDH000999r0712 and for E2.2-E4.2-E6.2 in the kit sheet
Mechanical accessories | 2 - Mechanical safety accessories
ABB | SACE Emax 2