ABB SACE Emax E1.2 Operating Instructions For The Design Engineer page 189

183 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Continued from the previous page
The following table shows the measurements and commands accessible from the menus:
Measurement or
Description
control
It shows the history of the minimum line-to-line voltage measurements in the form
U Min
of a histogram (see page 53).
It shows the history of the maximum line-to-line voltage measurements in the
U Max
form of a histogram (see page 53).
It shows the history of the maximum active power measurements in the form of a
P Max
histogram (see page 53).
It shows the history of the mean active power measurements in the form of a
P Mean
histogram (see page 53).
It shows the history of the maximum reactive power measurements in the form of
Q Max
a histogram (see page 53).
It shows the history of the mean active power measurements in the form of a
Q Mean
histogram (see page 53).
It shows the history of the maximum apparent power measurements in the form
S Max
of a histogram (see page 53).
It shows the history of the mean apparent power measurements in the form of a
S Mean
histogram (see page 53).
Power factor Shows the value of the power factor.
Energy counters Shows the values of active, reactive and apparent energy.
Reset counters It resets the energy counters.
It opens a list of the parameters for programming the resetting of the energy
RESET Energy
counters (see page 51).
Shows the waveform of the phase-to-phase voltage U12, acquired at the
Voltage 12
moment of selection (see page 54).
Shows the waveform of the phase-to-phase voltage U23, acquired at the
Voltage 23
moment of selection (see page 54).
Shows the waveform of the phase-to-phase voltage U31, acquired at the
Voltage 31
moment of selection (see page 54).
The following table shows the path for accessing the configuration parameters of the modules from the
display:
...
Main frequency
Phase Sequence
Settings
Modules
Monitor time
Power Controller
...
Local/Remote
Local bus
...
Voltage Transf.
Rated voltage
Primary voltage
Ekip Measuring
Secondary voltage
Power flow
Neutral connection
...
Functions
Electronic accessories | 3 - Ekip Measuring modules
ABB | SACE Emax 2
Continued on the next page