Table 9 Function Related Timers - Renesas 4513 User Manual

HARDWARE
FUNCTION BLOCK OPERATIONS
The 4513/4514 Group timer consists of the following circuits.
• Prescaler : frequency divider
• Timer 1 : 8-bit programmable timer
• Timer 2 : 8-bit programmable timer
• Timer 3 : 8-bit programmable timer
• Timer 4 : 8-bit programmable timer
(Timers 1 to 4 have the interrupt function, respectively)
• 16-bit timer
Prescaler and timers 1 to 4 can be controlled with the timer control
registers W1 to W6. The 16-bit timer is a free counter which is not
controlled with the control register.
Each function is described below.

Table 9 Function related timers

Circuit Structure
Prescaler Frequency divider
Timer 1 8-bit programmable
binary down counter
(link to P3 /INT0 input)
0
Timer 2 8-bit programmable
binary down counter
Timer 3
8-bit programmable
binary down counter
(link to P3 /INT1 input)
1
Timer 4 8-bit programmable
binary down counter
16-bit timer 16-bit fixed dividing
frequency
1-30
Count source
• Instruction clock
• Prescaler output (ORCLK)
• Timer 1 underflow
• Prescaler output (ORCLK)
• CNTR0 input
• 16-bit timer underflow
• Timer 2 underflow
• Prescaler output (ORCLK)
• Timer 3 underflow
• Prescaler output (ORCLK)
• CNTR1 input
• Instruction clock
4513/4514 Group User's Manual
Frequency
Use of output signal
dividing ratio
4, 16 • Timer 1, 2, 3 and 4 count sources
1 to 256 • Timer 2 count source
• CNTR0 output
• Timer 1 interrupt
1 to 256 • Timer 3 count source
• Timer 2 interrupt
• CNTR0 output
• Timer 4 count source
1 to 256
• Timer 3 interrupt
• CNTR1 output
1 to 256 • Timer 4 interrupt
• CNTR1 output
65536 • Watchdog timer
(The 15th bit is counted twice)
• Timer 2 count source
(16-bit timer underflow)
Control
register
W1
W1
W6
W2
W6
W3
W6
W4
W6