Renesas 4513 User Manual page 94

Skip condition
– – Transfers the input of port P0 to register A.
– – Outputs the contents of register A to port P0.
– – Transfers the input of port P1 to register A.
– – Outputs the contents of register A to port P1.
– – Transfers the input of port P2 to register A.
– – Transfers the input of port P3 to register A.
– – Outputs the contents of register A to port P3.
– – Transfers the input of port P4 to register A.
– – Outputs the contents of register A to port P4.
– – Transfers the input of port P5 to register A.
– – Outputs the contents of register A to port P5.
– – Sets (1) to port D.
– – Clears (0) to a bit of port D specified by register Y.
– – Sets (1) to a bit of port D specified by register Y.
(D(Y)) = 0 – Skips the next instruction when a bit of port D specified by register Y is "0."
(Y) = 0 to 7
– – Transfers the contents of register A to key-on wakeup control register K0.
– – Transfers the contents of key-on wakeup control register K0 to register A.
– – Transfers the contents of register A to pull-up control register PU0.
– – Transfers the contents of pull-up control register PU0 to register A.
– – Transfers the contents of register A to direction register FR0.
Datailed description
4513/4514 Group User's Manual
HARDWARE
MACHINE INSTRUCTIONS
1-81