Vmul - ST STM32F4 Series Programming Manual

The STM32 Cortex-M4 instruction set
3.10.21

VMUL

Floating-point Multiply.
Syntax
VMUL{cond}.F32 {Sd,} Sn, Sm
Where:
• 'cond' is an optional condition code, see
•
'Sd' is the destination floating-point value
•
'Sn, Sm' are the operand floating-point values.
Operation
This instruction:
1. Multiplies two floating-point values.
2. Places the results in the destination register.
Restrictions
There are no restrictions.
Condition flags
These instructions do not change the flags.
170/260
Conditional execution on page
DocID022708 Rev 6
PM0214
64.