Servo Speed - FUTABA 12K Instruction Manual

SERVO SPEED

The speed of the servo from 1CH to 12CH of
operation can be set up.
It can adjust to 0-27.
Speed becomes slow as a numerical value's 0
increases in the state of the fastest of the servo.
* Speed cannot be made quicker than the maximal rate of the
servo to be used.
RTN
HOME/EXIT
RETURN
Servo speed setting
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
* It will overlap, if speed control of a S.BUS servo setup is
used at the time of S.BUS servo use, and speed changes.
Please use one either.
* The speed of THR is not set up simultaneously with THR
DELAY (model menu : only airplane).
(The display screen is an example. The
screen depends on the model type.)
<Push Dial>
<Functions of Linkage Menu>
87