FUTABA 12K Instruction Manual page 113

TELEMETRY : DISTANCE
The Distance screen displays and sets altitude
data from an SBS-01G/02G GPS Sensor (sold
separately), and allows the distance to the airborne
aircraft to be read by the transmitter. When the
aircraft flies inside or outside the set distance an
alarm and vibration alerts the pilot.
RTN
HOME/EXIT
RETURN
Setting the reference position
*Now, the position of the present model was set to 0 m.
Setting a "too far" alert distance
*A GPS sensor must be installed in the aircraft.
*The GPS sensor is necessary, and is sold separately. Mount
and connect the sensor in accordance with the sensor
instruction manual.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
T-FHSS Air 12CH mode.
*The T-FHSS Air 14CH mode can use all the telemetry
functions.
S1
∼
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
Setting a "too close" alert distance.
*Positioning time of GPS
A short time is required until the positioning of
the GPS is established. In the meantime, don't
the GPS sensor's LED turns solid green. If it is
blinking green it is still acquiring the satellites
signals.
<Push Dial>
∼
*Alarm when the aircraft moves far
away.
"Vibes" type
If the following types are selected, the
transmitter will vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
<Functions of Linkage Menu>
113