FUTABA 12K Instruction Manual page 49

MODEL BASIC SETTING PROCEDURE
Airplane/glider basic setting procedure
1. Model addition and selection
Initially, the T12K assigns the first model to
function of the Linkage Menu is used to add
models and to select amongst models which are
already set.
models in its internal memory. Additional model
card.
The currently selected model name is displayed
before changing any settings, always confirm the
model name.
When a new model is added, the Model type
automatically appear. Please be aware that the
transmitter will stop transmitting temporarily when
you change the model.
link the receiver.
2. Model type selection
with the Model Type select function of the Linkage
Menu. For an airplane, select the model type from
among the 2 types: airplane and glider. And then
select the wing type and the tail type matched to
the aircraft.
3. Fuselage linkage
Connect the ailerons, elevators, throttle, rudder,
manual. For a description of the connection
Note that even for the same "airplane
model", when the wing type and tail type
are different, the channel assignment may
be different. (The channel assigned to each
function can be checked at the Function
menu of the Linkage Menu.)
<Receiver and Servo Installation> 49