FUTABA 12K Instruction Manual page 100

TELEMETRY
This screen displays your choice of data from the
receiver.
Also warnings can be activated regarding
other data from your aircraft. For example, if the
receiver voltage drops, the user can be warned by
an alarm (and vibration).
[TELEMETRY]
home screen
RTN
HOME/EXIT
RETURN
How to see telemetry data
*Receiver voltage can be checked immediately. An optional
sensor will need to be attached to S.BUS2 of a receiver if
you would like to see other information.
*No special setup is necessary if each sensor displayed
is left as in the default setup. Separate sensor ID
is also unnecessary. However, if two or more of
one kind of sensor is used, setup is required in the
"SENSOR" menu.
<Functions of Linkage Menu>
100
*It cannot be used in S-FHSS mode
HOME/EXIT
S1
<Push Dial>
Do not watch the transmitter screen during
is extremely dangerous. Have an assistant on hand to
check the screen for you. A pilot should NEVER take his
eyes off his aircraft.