FUTABA 12K Instruction Manual page 117

TELEMETRY : Servo sensor
The SBS-01S can monitor and display the in-
flight internal temperature of up to two S.BUS2
servos.
RTN
HOME/EXIT
RETURN
*Alarm when the temp has decreased.
Alert setting when servo #1 temperature increases
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
[Temperature]
∼ 114℃
*SBS-01S must be installed in the aircraft.
*It cannot be used in S-FHSS mode
<Push Dial>
*Alarm when the temp has increased.
If the following types are selected, the
transmitter will vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
Alert setting when servo #1 temperature decreases
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
<Functions of Linkage Menu>
∼ 115℃
"Vibes" type
117