FUTABA 12K Instruction Manual page 177

THR HOLD
This function sets the throttle cut position for
auto rotation. The throttle servo operating speed
RTN
HOME/EXIT
RETURN
Setting method
reset to the initial value.)
Note: Initially, this setting does not assign the
throttle hold switch. Prior to adjusting the
parameters for the throttle hold, we suggest
designating a throttle hold switch. To do so,
access the Condition menu within the Model
menu options.
reset to the initial value.)
Operation precautions
Warning
When actually starting the engine and flying,
always set the idle up condition switch to OFF
and start the engine at idle.
<Functions of Model Menu (Helicopter Functions)>
<Push Dial>
177