Setting Method] at the back of this manual.
*The display blinks.
*The display blinks.
*Check to ensure that the link mode is functioning properly
by operating the mix accordingly.
*Master channel control can be set to activate based on the
amount of stick input, or VR input, neither of which include
setup screen is displayed by pushing the RTN button with
"H/W" selected in the function selection. Select master
*The display blinks.
*The display blinks.
*Check the direction by actual operation.
132
<Model Menu (Common Functions)>
*The display blinks.
*Effective when a function is set in the master channel.
*When the RTN button is pushed for one second, the servo
operation position is reset to the initial value.
*When the RTN button is pushed for one second, the servo
operation position is reset to the initial value.)
*When the RTN button is pushed for one second, the servo
operation position is reset to the initial value.)