FUTABA 12K Instruction Manual page 64

START SEL.
START SEL is a function which starts and can
perform a model selection immediately.
Each time, it is convenient for the modeler
which is enjoying two or more models by one of a
transmitter.
Quick Select Screen
As the name suggests, the Quick Model Select
Function enables the modeler to change the
selected models rapidly each time the transmitter is
RTN
HOME/EXIT
RETURN
Setting Up and Adjusting the Quick Select Models
Quick Select Activation:
With the Quick Select (QUICK SEL.) option
<Functions of System Menu>
64
turned ON. With a few quick pushes, it is possible
to change models whereas before it would require
a multi-step process. The T12K stores up to four
models in the Quick Select offerings.
Model Select Screen
When the transmitter is turned on, it will open to
the Model Selection Screen immediately.
<Push Dial>
activated, there are two additional options available
for customization; ALWAYS and MDL (Model).
These options determine if/when the Quick Select
information will appear on-screen. ALWAYS,
as the name suggests, indicates that each time
the transmitter is powered-up, the Quick Select
information will appear on-screen. The MDL
(Model) setting indicates that the Quick Select
information will appear on-screen only when
the MDL button is pushed simultaneously as the
transmitter is turned ON. With the Quick Select
mode highlighted, use the Push Dial to move to
the activation setting options. Model (MDL) is the
default setting. Push the Return (RTN) button to
bring forth the options, then scroll to the ALWAYS
setting using the Push Dial pad. Push the Return