TELEMETRY : TEMP.
TEMP is a screen which displays/sets up
the temperature information from an optional
temperature sensor.
The temperature of the model (engine, motor,
If it becomes higher or lower than the setting an
alarm and/or vibration will alert you.
RTN
HOME/EXIT
RETURN
Alert set : Hot warning
℃
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
<Functions of Linkage Menu>
106
*A temperature sensor must be installed in the aircraft.
S1
℃
℃
℃
*It cannot be used in S-FHSS mode
<Push Dial>
If the following types are selected, the
transmitter will vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
Alert set : Low-temperature warning
℃
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
"Vibes" type
℃
℃
℃