FUTABA 12K Instruction Manual page 144

AIL to BRAKEFLP
This mix operates the brake flaps (FLP3/4)
in the aileron mode. When the aileron stick is
the aileron operation simultaneously and the roll
axis is improved.
menu and access the setup screen
shown below by pushing the RTN
button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
Setting method
the RTN button to switch to the data input
*The display blinks.
When setting a switch, move the cursor
*For a description of the switch selection method, see the
description at the back of this manual.
right item and push the RTN button to switch
<Model Menu (Airplane/Glider Functions)>
144
FLP 3
(Brake Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
<Push Dial>
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
To activate the mixing, move the cursor to
*The display blinks.
return to the cursor mode.
FLP 4
(Brake Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)