FUTABA 12K Instruction Manual page 170

MODEL MENU (HELICOPTER)
This section contains information on the
commands that apply to helicopters only. For
instructions on Airplanes and Gliders, refer to the
sections pertaining to those aircraft.
Use the Model Type function in the Linkage
Menu to select the swash type matched to the
respective aircraft.
Also, activate/deactivate flight conditions
according to your model. To do so, access at the
RTN
HOME/EXIT
RETURN
Model Menu functions (helicopter) list
PIT CURVE:
THR CURVE:
THR HOLD: Moves the throttle to idle during autorotation
SWASH MIX:
THROTTLE MIX: Compensates for power loss when cyclic applied
PIT to NEEDLE:
PIT to RUD: Compensates torque changes from pitch angle inputs
GYRO: Used to switch gyro sensitivity
GOVERNOR:
<Functions of Model Menu (Helicopter Functions)>
170
Condition Select screen prior to adjusting the
used)
The Dual Rate function and other functions
these respective sections for information on how to
do so.
<Push Dial>