AIRBRAKE
This function is used to increase the aircraft's
drag and is useful for landing or diving, etc.
(camber flap, brake flap) offset amount can be
activated by a switch.
The offset amount of the aileron, elevator,
Also the speed of the aileron, elevator, rudder and
activated, this will link the Airbrake to a stick,
switch, or dial. A separate stick switch or dial can
also be set as the ON/OFF switch.
the setup screen shown below by pushing the RTN
button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
selection
Note: The input numerics are examples. Adjust the travel to
Mode setting:
elevators offset rate
<Model Menu (Airplane/Glider Functions)>
match the aircraft.
*The display screen is an example. The
actual screen depends on the model type.
<Push Dial>
and elevators servo
speed setting
157