FUTABA 12K Instruction Manual page 112

TELEMETRY : BATTERY
In this screen, the battery voltage is displayed.
In order to use this function, it is necessary to
connect external voltage connector of R3008SB ⇔
SBS-01V ⇔ Battery
SBS-01V measures two batteries. The drive
battery connected to two lines is displayed on EXT-
VOLT. The battery for receivers connected to 3P
lines is displayed here.
RTN
HOME/EXIT
RETURN
Alert set
*When the RTN button is pushed for one second, the rate is
reset to the initial value.
<Functions of Linkage Menu>
112
*SBS-01V must be installed in the aircraft.
*It cannot be used in S-FHSS mode
<Push Dial>
"Vibes" type
If the following types are selected, the transmitter will
vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4