FUTABA 12K Instruction Manual page 185

* There is no change in the transmitter output even when the
the governor.
* In order to use the Governor function of the T12K, it is
necessary to change the settings on the governor for the low
side 700 rpm mode.
The chart below indicates the mode percentage and
the corresponding RPM.
MODE 0％
1000-2000rpm 1000rpm 1500rpm 2000rpm 2100rpm
1000-2500rpm 1000rpm 1500rpm 2500rpm 2700rpm
1000-3500rpm 1000rpm 1500rpm 3500rpm 3900rpm
700-2000rpm 700rpm 1500rpm 2000rpm 2100rpm
700-2500rpm 700rpm 1500rpm 2500rpm 2700rpm
700-3500rpm 700rpm 1500rpm 3500rpm 3900rpm
*For a description of the switch selection method, see the
sensitivity is reset to the initial value.)
50％ 100％ 110％
<Functions of Model Menu (Helicopter Functions)>
<EXAMPLE>RPM rate is changed with a
switch (SF) irrespective of condition.
SF : Top = #1
●
185