FUTABA 12K Instruction Manual page 143

AIL to CMBFLP
This mix operates the camber flaps (FLP1/2)
in the aileron mode. When the aileron stick
is manipulated, the ailerons and camber flaps
perform aileron operation simultaneously to
menu and access the setup screen
shown below by pushing the RTN
button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
Setting method
the RTN button to switch to the data input
*The display blinks.
When selecting a switch, move the cursor to
*For a description of the switch selection method, see the
description at the back of this manual.
or right item according to the wing type
and push the RTN button to switch to the
more
<Model Menu (Airplane/Glider Functions)>
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
*The display screen is an example. The actual
screen depends on the model type.
(Glider: Currently selected condition name)
<Push Dial>
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
When linking a mix, move the cursor to the
*The display blinks.
return to the cursor mode.
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
143