FUTABA 12K Instruction Manual page 123

SENSOR : RELOAD
When using multiple sensors of the same type
the sensors must be registered in the transmitter.
Connect all the sensors to be used to the T12K as
the following procedure. The ID of each sensor is
registered in the transmitter.
RTN
HOME/EXIT
RETURN
Reading all the sensors to be used
SENSOR : REGISTER
This function registers an additional sensor.
Connect the sensor as shown in the figure at the
right and register it by the following procedure.
The sensor ID is registered in the transmitter.
Additional sensor registration
* When the number of slots needed in registration is
performed. Disable unused slots or perform the following
relocate.
This page is set when using multiple telemetry sensors of the same type.
This page is set when using multiple telemetry sensors of the same type.
All the sensors to be used are connected.
<Push Dial>
<Functions of Linkage Menu>
3-way hub
or Y-harnesses
3-way hub
or Y-harnesses
123