Timer setting
[For a detailed description of the setting method, see [Switch
Setting Method] located on the next page.]
<Appendix>
188
■
Ex. one minute, ・・・ two minutes, ・・・
Ex. twenty seconds
Ex. ten, nine, eight ・・・ three, two, one
■
Ex. ・・・ ten minutes, ・・・ nine minutes, ・・・
・・・
Ex. ten, nine, eight ・・・ three, two, one
*The voice alarm of timer is delayed from the actual time.
*During logging telemetry data, the voice alarm is delayed
more.
*The priority of the timer speech is higher than the telemetry
speech. Then, the telemetry speech is stopped and the timer
speech is outputted, when the telemetry speech is outputted.
*Usually, the priority of the speech of ST1 is higher than ST2.
However, the timer which has started 10 seconds countdown
is given the priority. However, the timer which has started
10 seconds countdown is given the priority.
*The telemetry speech can not be outputted during 10
seconds countdown.
・・・