FUTABA 12K Instruction Manual page 67

AUTO LOCK
The Auto Lock function makes it possible to lock
the transmitter to prevent any unwanted input from
The auto lock function can be set in two ways.
LOCK TIMER
Auto Lock functions automatically when there is
no operation from the HOME screen display for a
chosen number of seconds.
RTN
HOME/EXIT
RETURN
Auto lock method
*If neither the Lock Timer or Start Lock functions are active
(OFF), then the key lock remains even if the power is turned off.
*If the Lock Timer is enabled and the Start Lock is off, the key
lock status is canceled each time the T12K is turned on.
START LOCK
Auto Lock functions automatically when the
model changes or power is turned on.
*To temporarily allow access to the T12K programming push
and hold the S1 or HOME/EXIT bitton for one second.
Please note, the Auto Lock function timer will resume
immediately once again.
● Manual lock
If HOME/EXIT button is pushed 1
second or more from a HOME screen,
a Push Dial locks manually.
● Manual lock
If S1 button is pushed 1 second or
more from a HOME screen, a Push
Dial locks manually.
<Push Dial>
● Lock release
Every lock function's push [ 1 second
or more ] of S1 button will release the
lock.
● Lock release
Every lock function's push [ 1 second
or more ] of HOME/EXIT button will
release the lock.
● Display of a lock
If locked, there will be sound and the
icon of a key will come out.
Danger
It is recommended to Lock the Push
Dial during flight, to prevent any
accidental pushes which could change
settings and cause an accident.
<Functions of System Menu> 67