FUTABA 12K Instruction Manual page 142

FLAP SET.
FLP1/2, brake flaps: FLP3/4) can be adjusted
independently for each servo according to the
wing type.
offset
The camber flaps of a 4-flap model can
be mixed with the brake flaps. (BRKFLP to
CMBFLP)
screen shown below by pushing the RTN button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
Setting method
Down item according to the wing type and
push the RTN button to switch to the data
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
push the RTN button to switch to the data
<Model Menu (Airplane/Glider Functions)>
142
point offset
*When the RTN button is pushed for one second, the
reference point is reset to the initial value.)
and return to the cursor mode.
the RTN button to switch to the data input
*The display blinks.
To select a switch, move the cursor to the
*For a description of the switch selection method, see the
description at the back of this manual.
FLP 4
FLP 3
(Brake Flap)
(Brake Flap)
FLP 1
FLP 2
(Camber Flap)
(Camber Flap)
*The display screen is an example. The actual
screen depends on the model type.
<Push Dial>
(Glider: Currently selected condition name)