And Return To The Cursor Mode; For A Description Of The Switch Selection Method, See The Description At The Back Of This Manual; Reset To The Initial Value.); Rtn Button To Access The Selection Screen - FUTABA 12K Instruction Manual

Setting method
push the RTN button to switch to the data
*The display blinks.
return to the cursor mode.
When setting a master switch, move the

RTN button to access the selection screen.

*For a description of the switch selection method, see the
description at the back of this manual.
When setting a safety switch, move the
RTN button to access the selection screen.
Move the cursor to the direction switch
item and push the RTN button to access the
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the aileron, elevator or
rudder item for each direction and push the
RTN button to switch to the data input mode.
*When the RTN button is pushed for one second, the rate is

reset to the initial value.)

and return to the cursor mode.

<Model Menu (Airplane/Glider Functions)>
168