Pitch Curve - FUTABA 12K Instruction Manual

PIT CURVE/PIT TRIM

Pitch Curve

This function adjusts the pitch operation curve
for each flight condition to optmize the model's
performance in relationship to the throttle stick position.
RTN
HOME/EXIT
RETURN
Setting method
reset to the initial value.
position is reset to the initial value.)
value at the corresponding points.
(Currently selected condition name)
Normal curve adjustment
Curve (Normal) function and adjust the curve so that up/
Idle up curve adjustment
*For the high side pitch curve, set the maximum pitch
so that it does not overload the engine. For the low side
pitch curve, create curves matched to loop, roll, 3D, and
other purposes and use the idle up curves according to the
performance.
Throttle hold curve adjustment
*The throttle hold curve is used when executing auto
rotations.
Operation precautions
Warning
When actually starting the engine and flying,
always set the idle up condition switch to OFF
and start the engine at idle.
<Functions of Model Menu (Helicopter Functions)>
<Push Dial>
*The graph display includes the pitch
trim operation.
171