Table Of Contents - FUTABA 12K Instruction Manual

Setting method
the RTN button to switch to the data input
*The display blinks.
When setting a switch, move the cursor to
the switch item and push the RTN button
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the aileron, flap or
elevator rate item and push the RTN button
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
and push the RTN button to switch to the
<Model Menu (Airplane/Glider Functions)>
156
FLP 3
(Brake Flap)
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
V-TAIL
ELEVATOR
ELEVATOR 2
*When the RTN button is pushed for one second, the servo
operation position is reset to the initial value.)
and return to the cursor mode.
When setting a cut switch, move the cursor
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the aileron, flap or
elevator speed item and push the RTN button
to switch to the data input mode.
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
When selecting an auto switch, move the
RTN button to access the selection screen.
*For a description of the switch selection method, see the
description at the back of this manual.
FLP 4
(Brake Flap)
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
AILVATOR
ELEVATOR
ELEVATOR 2