FUTABA 12K Instruction Manual page 38

The R3008SB receiver features bi-directional communication with a T-FHSS Air Futaba transmitter
using the S.BUS2 port. Using the S.BUS2 port an impressive array of telemetry sensors may be utilized.
It also includes both standard PWM output ports and S.BUS output ports.
* Telemetry is available only in the T-FHSS Air 14CH mode.
* The telemetry function requires the corresponding receiver (R3008SB).
* The T12K will enter and keep the ID number of the R3008SB that it is linked to.
* When using multiple receivers with one transmitter Telemetry can not be used.
Receiver
●Slot No.
Servos are classified by channel, but sensors
are classified by "slot" . Since the initial slot
number. of the T12K is preset at each sensor,
the sensors can be used as is by connecting
them. There are 1 31 slots.
38 <Before Use>
●Telemetry sensor (sold separately)
Your aircrafts data can be checked in the transmitter
by connecting various telemetry sensors to the
S.BUS2 connector of the receiver.
Power battery voltage is
displayed at the transmitter.
Info
voltage
Battery voltage is
displayed at the transmitter.
Info
Info
Info
Slot 1
Slot 2
Slot 3 ∼ 5
Slot 6 ∼ 7
Slot 8 ∼ 15
Slot 16
Slot 17
Slot 31