FUTABA 12K Instruction Manual page 151

CMBFLP to ELE
When the camber/speed flaps are utilized,
the aircraft might experience, a change in pitch.
This mix compensates for such changes by
incorporating elevator input.
access the setup screen shown below by pushing
the RTN button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
Setting method
the RTN button to switch to the data input
*The display blinks.
When setting a switch, move the cursor to
*For a description of the switch selection method, see the
description at the back of this manual.
FLP 1
(Camber Flap)
V-TAIL
ELEVATOR
ELEVATOR 2
(Glider: Currently selected condition name)
*The display screen is an
example. The actual screen
depends on the model type.
and push the RTN button to switch to the
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
<Model Menu (Airplane/Glider Functions)>
FLP 2
(Camber Flap)
AILVATOR
ELEVATOR ELEVATOR 2
<Push Dial>
151