FUTABA 12K Instruction Manual page 155

TRIM MIX
This function adjusts the trim offset rates of the
As an example this function can be set up for
and a slight amount of up elevator, and can be
speed flaps reflexed slightly, and a bit of down
elevator.
To prevent sudden trim changes when switching
and access the setup screen shown
below by pushing the RTN button.
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
selection
setting
smooth transition between the two conditions. It
is also possible to program a cut switch which
will turn off the delay.
Furthermore, you can set the auto switch, which
will link the trim mix to a stick, switch, or dial.
Additionally, the speed of the aileron, elevator,
*The display screen is an example. The actual
(Currently selected condition name)
and rudder offset rate
<Model Menu (Airplane/Glider Functions)>
screen depends on the model type.
<Push Dial>
and rudder servo
speed setting
155