Alcatel 5620 Troubleshooting Manual page 95

2
3
4
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Open the Circuit Ping configuration form and clear the results from the previous
diagnostic session, if any.
Note — You must use the Circuit Ping diagnostic to test the service in
both directions for the connection.
Configure the parameters for the diagnostic session and run the diagnostic.
Figure 4-11 shows the diagnostic configuration associated with a Circuit Ping from
site ID 10.1.200.51/32 to site ID 10.1.200.53/32 using the network in Figure 4-1.
Figure 4-11 Circuit Ping configuration form
Figure 4-12 shows the response associated with the diagnostic configuration in
Figure 4-11. Double-click on the entry in the Circuit Ping results form to view the
diagnostic details.
Figure 4-12 Circuit Ping results
Review the diagnostic results and assess whether the configuration meets the
network requirements. Table 4-3 lists the displayed messages.
4 — Troubleshooting services
4-15