Alcatel 5620 Troubleshooting Manual page 74

3 — Troubleshooting network alarms
Alarm name, ID, type, and default
probable cause
Name: Boot Environment Sync Failed
ID: 101
Type: Equipment Alarm
Probable cause: boot Environment Sync
Failed
Name: Bootable Config Backup Failed
ID: 103
Type: Configuration Alarm
Probable cause: file Transfer Failure
Name: Bootable Config Restore Failed
ID: 104
Type: Configuration Alarm
Probable cause: file Transfer Failure
Name: Config File Sync Failed
ID: 102
Type: Equipment Alarm
Probable cause: config File Sync Failed
Name: Hardware Boot Failure
ID: 108
Type: Software Alarm
Probable cause: software Boot Problem Due
To Hardware Issues
Name: Primary Image Boot Failure
ID: 191
Type: Configuration Alarm
Probable cause: boot Option File
Misconfigured
Name: Save Config Failed
ID: 105
Type: Configuration Alarm
Probable cause: file Access Error
Name: Software Boot Failure
ID: 107
Type: Software Alarm
Probable cause: software Boot Problem
Name: Software Downloading
ID: 109
Type: Software Alarm
Probable cause: software Downloading
Name: Software Initialized
ID: 111
Type: Software Alarm
Probable cause: software Initialized
(1 of 2)
3-38
Table 3-27 Software (sw) domain alarms
Default Severity, object type
Severity: critical
Object type: Backup Restore
Manager
Domain: sw
Severity: major
Object type: Backup Restore
Manager
Domain: sw
Severity: major
Object type: Backup Restore
Manager
Domain: sw
Severity: critical
Object type: Backup Restore
Manager
Domain: sw
Severity: critical
Object type: Card Software
Domain: sw
Severity: warning
Object type: Card Software
Domain: sw
Severity: major
Object type: Backup Restore
Manager
Domain: sw
Severity: major
Object type: Card Software
Domain: sw
Severity: warning
Object type: Card Software
Domain: sw
Severity: warning
Object type: Card Software
Domain: sw
Alcatel 5620 Service Aware Manager, Release 2.1 R2
Additional information
Synchronization of bof file between
CPM cards failed.
5620 SAM failed to back up the 7x50
node configuration files.
5620 SAM failed to backup the 7x50
node configuration files.
Synchronization of the configuration
file between CPM cards failed.
7x50 software failed to boot because
of hardware issue(s).
—
The admin save command failed on
the 7750 SR.
—
—
—
May 2005 95-5887-01-00-B