Alcatel 5620 Troubleshooting Manual page 147

2
3
4
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Contact your Alcatel support representative to verify that your license enables
the 5620 SAM-O server.
vi Type the updated license key in the file, if required.
vii Save the changes, if required.
viii Open a shell or window.
ix Go to the install directory bin directory or folder.
x Type:
nmsserver read_config ↵
The changes to the nms-server.xml file are read, and the license count for
managed cards (MDAs) is updated. Any additional licensed software modules
are also enabled.
Check the amount of swap space available. Insufficient swap space can prevent the
5620 SAM server from launching. See Procedure 7-4 for more information.
Specific ports need to be available for the 5620 SAM server. See Procedure 6-4 for
more information about specific port values.
i Go to the install directory/nms/config directory or folder and locate the
nms-server.xml file.
ii Check the ejbServerPort xml tag.
iii Ensure that this port number is not used by any other application. For example,
a browser launched on the same platform as the 5620 SAM server may be
using the same port number required by the 5620 SAM server. Alcatel
recommends that you do not run any other applications on the 5620 SAM
server platform.
The 7450 ESS and 7750 SR are configured to send SNMP packets of up to 9216
bytes, as described in step 3 in Procedure 9-3.
9 — Troubleshooting 5620 SAM server issues
9-3