Alcatel 5620 Troubleshooting Manual page 73

Table 3-24 Service tunnel management (svt) domain alarms
Alarm name, ID, type, and default
probable cause
Name: Circuit Down
ID: 99
Type: Circuit Alarm
Probable cause: circuit Not Ready
Name: Keep Alive Problem
ID: 100
Type: Oam Alarm
Probable cause: keep Alive Failed
Name: Label Problem
ID: 98
Type: Circuit Alarm
Probable cause: label Problem
Name: Tunnel Down
ID: 30
Type: Path Alarm
Probable cause: tunnel Down
Alarm name, ID, type, and default
probable cause
Name: Management Access Filter
Misconfigured
ID: 76
Type: Configuration Alarm
Probable cause: Invalid Source Port Identifier
Alarm name, ID, type, and default
probable cause
Name: Mediation Authentication Failure
ID: 75
Type: Communications Alarm
Probable cause: No Mediation Policy Found
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Default Severity, object type
Severity: critical
Object type: Circuit
Domain: svt
Severity: warning
Object type: Tunnel
Domain: svt
Severity: critical
Object type: Circuit
Domain: svt
Severity: critical
Object type: Tunnel
Domain: svt
Table 3-25 Site (sitesec) domain alarm
Default Severity, object type
Severity: warning
Object type: Maf Entry
Domain: sitesec
Table 3-26 SNMP domain alarm
Default Severity, object type
Severity: critical
Object type: Poller Manager
Domain: snmp
3 — Troubleshooting network alarms
Additional information
The underlying LSP is operationally
down, or the LDP sessions are
down.
—
—
A service tunnel (SDP) is down
because the LSP that was relying on
it is down.
Additional information
Management access filters are used
to restrict management of the 7750
SR by other nodes outside specific
networks or subnetworks, or through
designated ports. The filters must be
configured locally.
The default action denies or permits
management access in the absence
of a more specific management
access filter match.
Each entry represents a collection of
filter match criteria.
Additional information
—
3-37