Alcatel 5620 Troubleshooting Manual page 93

4
5
6
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Open the MTU Ping configuration form and clear the results from the previous
diagnostic session, if any.
Note — You must use the MTU Ping diagnostic to test the service in
both directions for the connection.
Configure the parameters for the diagnostic session. Enter the MTU value recorded
in step 2 in the End Message Size field.
Run the diagnostic. The MTU Ping increments the datagram size until it fails to pass
through the SDP data path. Figure 4-9 shows the diagnostic configuration
associated with a MTU Ping from site ID 10.1.200.52/32 to site ID 10.1.200.53/32
using the network in Figure 4-1.
Figure 4-9 MTU Ping configuration form
Figure 4-10 shows the response associated with the diagnostic configuration in
Figure 4-9.
4 — Troubleshooting services
4-13