Procedure 4-4 To Verify Connectivity For All Egress Points In A Service Using Mac Ping And Mac Trace - Alcatel 5620 Troubleshooting Manual

4 — Troubleshooting services
Procedure 4-4 To verify connectivity for all egress points in a
service using MAC Ping and MAC Trace
1
2
3
4-8
Enable the OAM diagnostics for the service. See the 5620 SAM User Guide.
Open the MAC Ping configuration form and clear the results from the previous
diagnostic session, if any.
Note — You must use the MAC Ping and MAC Trace diagnostic to test
the service in both directions for the connection.
Configure the parameters for the diagnostic session and run the diagnostic.
a You can target the MAC broadcast address of FF-FF-FF-FF-FF-FF in the data
plane to flood the service domain and receive a response from all operational
service access ports. Figure 4-3 shows the diagnostic configuration associated
with a MAC Ping from site ID 10.1.200.51/32 to site IDs 10.1.200.52/32 and
10.1.200.53/32 using the network in Figure 4-1.
Figure 4-3 MAC Ping configuration form for a multiple address broadcast
Figure 4-4 shows the response associated with the diagnostic configuration in
Figure 4-3.
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B