Alcatel 5620 Troubleshooting Manual page 76

3 — Troubleshooting network alarms
Alarm name, ID, type, and default
probable cause
Name: Path Alarm Indication Signal
ID: 77
Type: Communications Alarm
Probable cause: Path Alarm Indication Signal
Name: Path Loss Of Pointer
ID: 78
Type: Communications Alarm
Probable cause: Path Loss Of Pointer
Name: Path Remote Defect Indicator
ID: 79
Type: Communications Alarm
Probable cause: Path Remote Defect
Indicator
Name: Path B3 Error
ID: 80
Type: Communications Alarm
Probable cause: Path Loss Of Pointer
Name: Path Payload Mismatch
ID: 81
Type: Communications Alarm
Probable cause: Path Payload Mismatch
Name: Path Remote B3 Error
ID: 82
Type: Communications Alarm
Probable cause: Path Remote Defect
Indication
Name: Rx Section Synchronization Error
ID: 93
Type: Communications Alarm
Probable cause: Rx Section Synchronization
Error
Name: Section B1 Error
ID: 87
Type: Communications Alarm
Probable cause: Section B1 Error
Name: Section Loss Of Frame
ID: 90
Type: Communications Alarm
Probable cause: section Loss Of Frame
Name: Section Loss Of Signal
ID: 91
Type: Communications Alarm
Probable cause: section Loss Of Signal
(2 of 3)
3-40
Default Severity, object type
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Alcatel 5620 Service Aware Manager, Release 2.1 R2
Additional information
—
—
—
—
—
—
Reports section synchronization
failure as reported by the S1 byte.
When configured, SS1F alarms are
raised and cleared.
Reports a b1 line error condition
raised by the remote node when b1
errors are received from this node.
When configured, LREI traps are
raised but not cleared.
Reports SLOF errors. When
configured, SLOF alarms are raised
and cleared.
Reports a SLOS error on the
transmit side. When configured,
SLOS alarms are raised and
cleared.
May 2005 95-5887-01-00-B