Alcatel 5620 Troubleshooting Manual page 117

Type Default port
number
5620 SAM server 1098 and 1099
4444
4445
8080
8443
8093
162
5620 SAM database 1521
9002
Managed devices 161
20 and 21
22
23
2
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Table 6-2 Firewall port default settings
Type
TCP
UDP
TCP
UDP
TCP
TCP
TCP
Contact your technical support representative for more information about
configuring ports that need to be open or protected by a firewall, depending on the
system architecture.
Run the following to check routing information.
i Open a DOS shell or command tool on the PC or workstation.
ii Run a trace route command to determine the path taken to a destination by
sending an ICMP echo request message.
•
Type tracert on a Windows PC
•
Type traceroute on a Solaris workstation
The path displayed is the list of near-side interfaces in the path between a
source host and a destination machine. The near-side interface is the interface
closest to the source host.
iii Run the netstat -r and arp -a commands to display active TCP connections,
Ethernet statistics, the IP routing table, and the ports on which the PC or
workstation is listening.
6 — Troubleshooting network management LAN issues
Description
org.jboss.naming.NavingService for client and
5620 SAM-O communication
org.jboss.invocation.jrmp.server.JRMPInvoker for client
and 5620 SAM-O communication
org.jboss.invocation.pooled.server.PooledInvoker for
client and 5620 SAM-O communication
HTTP 5620 SAM-O for client access
HTTPS 5620 SAM-O for client access
JMS for 5620 SAM-O
SNMP traps
JDBC
RMI database proxy port for switchover or failover
requests
SNMP connections to the managed devices
FTP (passive) connections to the managed devices
SSH connections to the managed devices
Telnet connections to the managed devices
6-5