Alcatel 5620 Troubleshooting Manual page 77

Alarm name, ID, type, and default
probable cause
Name: Section S1 Failure
ID: 86
Type: Communications Alarm
Probable cause: section S1 Failure
Name: Sonet Path Alarm Indication Signal
ID: 129
Type: Communications Alarm
Probable cause: Path Alarm Indication Signal
Name: Sonet Path B3 Error
ID: 132
Type: Communications Alarm
Probable cause: Path B3 Error
Name: Sonet Path Loss Of Pointer
ID: 130
Type: Communications Alarm
Probable cause: Path Loss Of Pointer
Name: Sonet Path Payload Mismatch
ID: 133
Type: Communications Alarm
Probable cause: path Payload Mismatch
Name: Sonet Path Remote B3 Error
ID: 134
Type: Communications Alarm
Probable cause: path Remote B3 Error
Name: Sonet Path Remote Defect Indication
ID: 131
Type: Communications Alarm
Probable cause: path Remote Defect
Indication
Name: Sonet Path Unequipped Path Error
ID: 143
Type: Communications Alarm
Probable cause: path Unequipped Path Error
Name: Tx Section Synchronization Error
ID: 92
Type: Communications Alarm
Probable cause: Tx Section Synchronization
Error
(3 of 3)
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Default Severity, object type
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel
Domain: sonetequipment
Severity: major
Object type: Sonet Channel Monitor
Specifics
Domain: sonetequipment
Severity: major
Object type: Sonet Port Specifics
Domain: sonetequipment
3 — Troubleshooting network alarms
Additional information
See THE Rx Section
Synchronization Error alarm in this
table.
Reports PAIS errors. When
configured, PAIS alarms are raised
and cleared.
Reports a path error condition raised
by the remote node when b3 errors
are received from this node. When
configured, PREI traps are raised
but not cleared.
Reports PLOP (per tributary) errors.
When configured, PLOP traps are
raised but not cleared.
Reports a PPLM. As a result, the
channel is operationally down.
When configured, PPLM traps are
raised but not cleared.
Reports a PREI raised by the remote
node when b3 errors are received
from this node. When configured,
PREI traps are raised but not
cleared
Reports path remote defect
indication errors. When configured,
PAIS alarms are raised and cleared.
—
Reports SS1F alarms as reported by
the S1 byte. When configured, SS1F
alarms are raised and cleared.
3-41