Duplicate Configuration Form Conflicts; Responding To 5620 Sam Client Gui Warning Messages; Procedure 11-1 To Respond To A Warning Message - Alcatel 5620 Troubleshooting Manual

Duplicate configuration form conflicts

There are multiple ways to access a configuration form for the same object. For
example, you can view the configuration form for a service by choosing Service
Management→Browse Services, or you can access the service by clicking on the
Services tab button for a specified subscriber after you choose Service Management
Manager→Subscribers/Services. When you try to perform both accesses, a warning
message is displayed, as shown in Figure 11-7.
When this warning message is displayed, you have another form open for the same
object. When two forms are open concurrently for the same object, there may be
unexpected results because changes committed from one form are not reflected in the
other form.
11.2

Responding to 5620 SAM client GUI warning messages

The following procedure describes how to respond to a warning message when you
perform an action with the 5620 SAM client.

Procedure 11-1 To respond to a warning message

1
2
Alcatel 5620 Service Aware Manager, Release 2.1 R2
May 2005 95-5887-01-00-B
Figure 11-7 Duplicate form warning dialog box
Perform an action.
A warning message dialog box opens. For example, when you configure a site
password policy, at least one authentication order must be specified as the default
in order to configure the authentication order parameters. If at least one
authentication order is not configured, a warning message is displayed, as shown in
Figure 11-8.
Figure 11-8 Authentication warning dialog box
After you read the warning message, click on the OK button. The warning message
dialog box closes.
11 — 5620 SAM client GUI warning message output
11-5