Sharp MX-3610N User Manual page 507

Settings] → [Default Settings] → [Dial Mode Setting], then tap the [Auto Select] key.
If necessary, you can set the type of telephone line manually.
This setting can only be activated in Canada.
3. Make sure the main power switch is in the "|"
position.
When the main power indicator is lit up, the
main power is in the "|" position. If the main
power indicator is not lit up, turn the main
power switch to the "|" position and press
the [POWER] button on the operation panel.
* If the fax function will be used, and in
particular if reception or timer transmission
will take place at night, always keep the
main power switch in the "|" position.
4. Checking the date and time
Verify that the correct date and time are set in the machine.
Set the data and time in the setting mode of the machine.
To set the date and time of the machine:
In "Setting mode", select [System Settings] → [Default Settings] → [Clock Adjust].
If [Disabling of Clock Adjustment] has been enabled, the date and time cannot be
modified.
In this case, select [System Settings] in "Setting mode" and select [Operation
Settings] to disable the [Disabling of Clock Adjustment] setting.
5. Store the sender fax number.
Store a sender name in [Sender Name] and a fax number in [Fax No.]. Be sure to configure
this information, as it is required for communication.
To store the sender's name and address:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Operation