Sharp MX-3610N User Manual page 772

Specify the erase width.
Tap the numeric value display indicating the margin shift area on the front side
or reverse side, and enter the area using the numeric keys.
To quickly set the area, first specify a value close to the desired value by the
numeric keys, then adjust it with
After the settings are completed, tap
To cancel the erase settings:
Tap the [Clear] key.
Tap the [Start] key to start scanning of the original.
Tap the [Preview] key to check the preview of an image before sending a fax. For
more information, see "CHECKING THE IMAGE TO BE TRANSMITTED".
If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
If you placed the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.
Index
.
.
Contents Overview